RME OctaMic II

  • RME OctaMic II
  • RME OctaMic II
  • RME OctaMic II
  • RME OctaMic II
  • RME OctaMic II
  • RME OctaMic II
  • RME OctaMic II
  • RME OctaMic II
  • RME OctaMic II
  • RME OctaMic II
  • RME OctaMic II
  • RME OctaMic II
RME
Proizvod #: 129249
Marka: RME
Niz: RME Octamic
Kategorija: Višekanalno Mikrofonsko Pretpojačalo
dostupnost:  <h3>dostupnost</h3><span><span class="red">Naručiti ćemo proizvod za Vas što je brže moguće</span></span> Naručiti ćemo proizvod za Vas što je brže moguće    Obavijesti me
CHF 1267.00
UVP: CHF 1489.00
Na primjer:

Količina:
8-channel microphone amplifier with integrated transformers.

The OctaMic II integrates an 8-channel 192 kHz/24 bit AD conversion with eight hi-class microphone channels, equipped with the finest components and approved RME technology.
Proizvod nije zadovoljan za &quot;povrat od 30 dana&quot;
Ova stranica sadrži opise automatski prevedene prevoditeljskom uslugom. 

Opis

Facilities:

- 8 x Mic / Line Preamp Input (XLR / TRS Combo)
- 8 x Line Output (TRS balanced)
- 8-fold AD converter (up to 192 kHz)
- 2 x ADAT Output (S / MUX, up to 96 kHz)
- 4 x AES / EBU Output (D-sub, up to 192 kHz)
- 1 x AES / SPDIF Sync Input
- Phase, Low Cut and Phantom power per channel
- Clip Hold Memory


OctaMic II integrates an 8-channel 192 kHz / 24 bit conversion with eight hi-class microphone channels, equipped with the finest components and approved RME Technology. Lowest distortion, excellent noise ratio and perfectly linear frequency response transmit and amplify the microphone signals truly unchanged, guaranteeing a clean sound.

The OctaMic II offers the following improvements over the previous OctaMic:

- The balanced TRS inputs of the Neutrik Combo XLR jacks are phantom power and now full-line inputs. The revised input circuits allows for a maximum input level of +21 dBu with a gain range from 6 dB to 60 dB gain.
- Improve signal to noise ratio of analog to digital converter to 107.5 dB
- Improved THD values at very high gains
- Optimised heat dissipation by a larger housing with improved convection
- Extremely stable, short circuit proof 48 V phantom power
- Internal universal power supply with line filter, insensitive to voltage fluctuations


Features

OctaMic II offers 8 balanced mic / line inputs via XLR connectors. Each channel has individually switchable phantom power (48V), low cut filter and phase reversal. The gain is in the range 60-60 dB. After activating the special Clip Hold mode and a detected overload begins the respective clip LED aufzublitzen once per second. Such a peak detection, it saves the user to constantly watch the LEDs. Same time momentary overloads are still displayed correctly.

On the front are among other switches for power and the choice of reference level of -10 dBV, +4 dBu or Hi Gain (+19 dBu). This unusual feature offers two advantages. First, the reference level can be easily adapted to any current device from RME, the HDSP 9632 through Multiface up to the first class of converters ADI-8 series. Furthermore, the signal to noise ratio is optimized, the Clip-LED will exactly match that of the ADI-8 (2 dB below 0 dBFS).

On the back are standing by the microphone signals with balanced line level to 8 stereo TRS jacks. Designed specifically for the OctaMic II developed internal high performance switching power supply operates from 100 V to 240 V AC. It is short-circuit, has an integrated line filter, voltage regulating network completely, and suppresses mains interference.
Top
A / D conversion

The 8-channel AD-conversion of the OctaMic II up to 192 kHz sample rate. The digitized signal is simultaneously on a double ADAT output (S / MUX, up to 96 kHz) and on a 25-pin D-Sub socket (4 AES outputs, up to 192 kHz). The digital part can be internally (master) and externally via word clock, AES / EBU and SPDIF are synced.

RME's outstanding Steady Clock (TM) ensures perfect AD-conversion, as jitter on the external sync-sources is nearly completely removed. All settings are DIP switch on the back of OctaMic II. Analog and digital outputs can both be used simultaneously. The choice of reference level affects the analog output signal / clip indication and the AD-conversion will react only to the Gain-pots.

Nekretnine

Equipment

8 x Mic / Line Preamp Input (XLR / TRS Combo)

8 x Line Output (TRS balanced)

8-fold AD converter (to 192 kHz)

2 x ADAT Output (S / MUX, up to 96 kHz)

4 x AES / EBU Output (D-sub, up to 192 kHz)

1 x AES / SPDIF Sync Input

Phase, Low Cut and Phantom power per channel
 
Clip Hold Memory


Technical data


8 balanced XLR / TRS mic / line inputs

54 dB Gain Range

Input impedance: XLR 2 kOhm, TRS 5 kOhm

Analog input level from -40 dBu up to +21

Maximum output level +21 dBu

Output Impedance: 75 Ohm

Output level switchable Hi Gain / +4 dBu / -10 dBV

SNR: 129 dB EIN @ 150 Ohm

THD: <0.0005% @ 30 dB Gain

Wide frequency range (200 kHz) with special RF input filters

Frequency response -0.5 dB: 5 Hz - 200 kHz

Cut filter: 80 Hz, 18 dB / oct.

Line Out: 6.3 mm stereo jack, servo

Phantom power +48 Volt switchable per channel

Internal wide-range power supply 100-240 Volt

Unbeatable price / performance ratio!
AD conversion

SNR:> 110 dB (A)

Supported sample frequencies: 28 kHz - 200 kHz

THD: <0.0003%, <-110 dB

Sync sources: AES / EBU (also SPDIF coaxial), word clock, internal

Steady Clock (TM) ensures best sound quality even with jittery external clocks
OctaMic II

Top
Accessories

- Pro Digital Breakout Cable, AES / EBU, 25-pin D-sub to 4 x XLR male + 4 x XLR female, 1m/3m/6m (ALVA Audio)
- Digital D-Sub Cable Pro, AES / EBU, 1m/3m/6m (ALVA Audio)
- Optical ADAT Toslink cable 1m/2m/3m/5m/10m (ALVA Audio)
- Word clock cable, 1 x BNC male to 1 x BNC male, 1m/5m/10m (ALVA Audio)

- Težina: 4.670kg
Količina:-+
Zašto MusiX?
  • Besplatna dostava u Švicarskoj od CHF 50.-
  • Jamstvo od 30 dana za povrat novca
  • 3 godine jamstva *u CH*
  • Osobni savjet
  • 25.000 proizvoda na lageru
  • Dostava s računom
  • Dnevne isporuke
Vaše postavke
Temelj popusta: 1. Prethodna MusiX cijena, 2. Preporučena cijena