Fino a -70%
Commenti dei clienti
Francesco C. - 15.05.2015
Ottimo mixer grande potenza in un peso ridotto in un spazio davvero molto contenuto eccellente qualità' sonora che fanno di questo mixer un ottimo strumento di lavoro!!!!...e ringrazio tutto il team della Musix per il servizio e affidabilità' e veloce per la consegna del prodotto!!! grazie
Cesare V. - 29.01.2018
Ottimo servizio ai cliente sotto tutti i punti di vista
Nathan F. - 09.06.2016
Vorrei ringraziare lei e l'azienda per il vostro servizio serio, la vostra attenzione nei confronti dei clienti, della vostra gentilezza e pazienza. Grazie molte per tutto.
Mario C. - 18.04.2017
Sono molto contento del prodotto che mi hai consigliato!! Ottimo consiglio, Grazie!
Mattia F. - 15.12.2016
Perfetto, grazie mille per il servizio!

Focusrite ISA One Digital

  • Focusrite ISA One Digital
Focusrite
Prodotto Nr.: 142222
Marca: Focusrite
Categoria: Ein-Kanal-Mikrofon-Preamp
Disponibilità:  Focusrite ISA One Digital | <b>In stock</b> In stock
NegozioIn stock
Giebenach BLFocusrite ISA One Digital | <b>In stock</b>  In stock
Spese di Spedizione: Spedizione gratis in Svizzera
CHF 839.00
Per esempio:

Quantità:
Single channel pre-amp/DI incl. A/D-Karte

Like the original ISA One, the Digital version has Focusrite's classic transformer-based circuitry used in the legendary Forte Console.

Descrizione

Focusrite's most affordable ISA pre-amplifier now has a digital card as standard. The ISA One Digital is now perfect for getting the legendarily transparent Focusrite sound directly into your recording system.

In addition to the ISA mic-preamp, ISA One Digital also has a direct input. This means that you can record an instrument and microphone simultaneously. This makes it ideal for recording singer songwriters, allowing you to track vocals and guitar at the same time. Or, the tried and tested technique of mic-ing up an guitar/bass amp cabinet and taking a direct out at the same time.
Key Features Back top
ISA Series Transformer-based Pre-amplifier
Encased in a rugged and portable chassis, ISA One offers the classic Focusrite microphone pre-amplifier at its lowest cost to date.

Stereo 192kHz ADC
Cutting-edge conversion technology, incorporating Focusrite analogue circuitry to deliver the best A-D performance in its class (Dynamic range of 119dB).

Flexible Independent D.I. Channel
ISA One is ideal for both engineers and demanding performers alike, featuring independent gain control, an output for routing to an amp, an independent XLR output on the rear and routing to the optional ADC.

Switchable Impedance
Choose one of four carefully selected input impedances, including the original ISA 110 setting, to suit any microphone.

Headphone Output with Volume Control
ISA One can feed either a sum of the two inputs to the headphones output, or an external stereo cue mix (such as a stereo mix feed from an interface) via two TRS Jack inputs on the rear of the unit.

Dedicated Insert Point
Allows you to place extra processing between the pre-amplifi er or D.I. and the optional converter, such as an EQ or compressor.

Proprietà

Mic Input Response
- Gain range = 0dB to 60dB in 10dB steps + 20 dB of variable gain
- Input Impedance, variable as follows:-

(Switched Impedance setting Equivalent Input Impedance at 1kHz)

Low = 600 Ohms
ISA110 = 1400 Ohms
Med = 2400 Ohms
High = 6800 Ohms

- EIN (equivalent input noise) = -126dB measured at 60dB of gain with 150 Ohm terminating impedance and 22Hz/22kHz band-pass filter
- Noise at main output with gain at unity (0dB) = -97dBu measured with a 22Hz/22kHz band-pass filter
- Signal to noise ratio relative to max headroom (9dBu) = 106dB
- THD at medium gain (30dB) = 0.0009% measured with a 1kHz -20dBu input signal and with a 22Hz/22kHz band-pass filter
- Frequency response at minimum gain (0dB) = -0.5dB down at 10Hz and -3dB down at 125kHz
- Frequency response at maximum gain (60dB) = -3dB down at 16Hz and -3dB down 118kHz
- CMRR=98dB (Channel 1, 1kHz, maximum gain with +24 dBu input)
- Crosstalk Channel to Channel: with 10dB@1kHz input to chA, chB output =104dBrA. With 10dB@10kHz input to chA, chB output = 84dBrA


Line Input Response
- Gain range = -20dB to +10dB in 10dB steps + 20 dB of variable gain
- Input Impedance = 10k? from 10Hz to 200kHz
- Noise at main output with gain at unity (0dB) = -96dBu measured with a 22Hz/22kHz band-pass filter
- Signal to noise ratio relative to max headroom (24dBu)=120dB
- Signal to noise ratio relative to 0dBFS (+22dBu) = 118dB\
- THD at unity gain (0dB) = 0.001% measured with a 0dBu input signal and with a 22Hz/22kHz band-pass filter
- Frequency Response at unity gain (0dB) = -0.3dB down at 10Hz and -3dB down at 200kHz


Instrument Input Response
- Gain range = 10dB to 40dB continuously variable
- Input Impedance:
High = greater than1M?
Low =greater than 300k?
- Noise at minimum gain (+10dB) = -92dBu measured with a 22Hz/22kHz band-pass filter
- Noise at maximum gain (+40dB) = -62dBu measured with a 22Hz/22kHz band-pass filter
- THD at minimum gain (+10dB) = 0.001% measured with a 10dBu input signal and with a 22Hz/22kHz band-pass filter
- Frequency Response at 10dB gain with -10dB input = 10Hz-100kHz +/- 0.6dB
- Frequency Response at 40dB gain with -40dB input = -2.5dB down at 10Hz and 0dB at 100kHz


High Pass Filter
- Roll off = 18dB per octave 3 pole filter
- Fixed Frequency 75Hz measured at the 3dB down point


Meters
- Moving coil (MC) meter is factory calibrated to 0VU = +4dBu with 1kHz sinewave. With the VU Cal button pressed the meter can be adjusted on the rear panel to allow 0VU to equal +10dBu to +26dBu with the centre detent being equal to +22dBu.
- Peak LED meters calibrated in the detent position for 0dBFS = +22dBu, calibration is adjustable on the rear panel to allow 0dBFS to equal +10dBu to +26dBu
- Routing for MC and Peak1 meter is after the HPF, pre insert send or switched post insert return. Peak2 is always pre ADC channel 2, which can be fed by external input or Instrument input.
- LED levels are as follows when peak calibration is set to center detent on the rear panel. (This is when using the internal ADC).

0 = +22dBu
-2 = +20dBu
-6 = +16dBu
-12 = +10dBu
-18 = +4dBu
-42 = -20dBu


FRONT AND REAR CONNECTIVITY

Analogue Channel Inputs:
- Mic input: XLR x 1
- Line input: XLR x 1 and TRS x1
- Instrument input TRS Jack: XLR x 1
- External ADC input: TRS Jack x 1
- Return: TRS Jack x 1

Analogue Channel Outputs:
- Send: TRS Jack x 1
- Balanced line output: XLR x 1
- DI output: XLR x 1
- DI through: TS Jack x 1

Analogue Channel Additional I/O:
- Cue mix left input: TRS Jack x 1
- Cue mix right input: TRS Jack x 1
- Headphones output: ¼" TRS Jack x 1

- Peso: 3.900kg
- Altezza: 104mm
- Larghezza: 220mm
- Profondità: 290mm

Predecessore

MusiX Giebenach
MusiX AG
Sägeweg 15
4304 Giebenach BL
Giebenach
Tel: 091 946 46 60
Lu-Ma: Solo ritiri 10h-12h + 13:30-17:30
Me-Ve: 10h-12h + 13:30-17:30
Sa: 10h-16h

Più informazioni ...chiudere
Quantità:-+
Vantaggi
  • Spedizione gratuita in Svizzera a partire da CHF 50.-
  • 30 giorni soddisfatti o rimborsati
  • 3 anni di garanzia *in CH*
  • Consulenza personalizzata
  • 25,000 prodotti in stock
  • Consegna contro fattura
  • Consegne giornaliere
Commenti dei clienti
Fiorenzo I. - 07.12.2016
Sono soddisfatto del servizio e per l'ottima consulenza ricevuta!
Fabio B. - 02.12.2016
Grazie mille per il servizio tempestivo
Valentino G. - 23.03.2018
Molto efficienti ed estremamente rapidi nella spedizione!
Michel C. - 10.02.2018
Mi trovo bene, ottimo servizio, grande gentilezza.
Simone B. - 23.04.2018
Sì è arrivato subito. La ringrazio molto per la professionalità e la rapidità della spedizione. Avete sicuramente guadagnato un cliente!
Impostazioni
Base di sconto: 1. Prezzo MusiX precedente, 2. Prezzo di listino consigliato
Come possiamo esserle utili?MusiX chat